Thomson Micron提供了世界上種類最多的的TRUE行星齒輪減速機。 我們的行星齒輪減速機齒輪電機齒輪電機產品系列包含NemaTRUE與ValueTRUE兩個系列,氣機架尺寸為60 mm到142 mm,比例為3:1到25:1。這些行星齒輪減速機產品使用了螺旋鼓齒式TRUE Planetary設計,其平滑度、轉矩與精度均處于業界領先水平。
- 首頁
- 產品
- True行星減速機
- AKM齒輪電機
AKM齒輪電機
? 簡單選擇經過工廠測試的組合
? 不銹鋼減速機一體化設計理念,隨時可用安裝包
? 工廠集成與測試設計
? 組裝時間更短,機械安裝更快
產品資料
產品選型
Not finding the right gearhead for your needs? Visit Micron Motioneering, our full-featured sizing tool!
Family
Backlash
Peak Torque
Angle
Frame Size
Slim Line
Ratio
Gearing
Duty Cycle
Output Shaft: Single, Dual or Hollow
Redimount
Select other checkboxes to view available options
比較
3D 模型
Family
- ValueTRUE (VT) - Helical Crowned Gearing
- UltraTRUE (UT) - Helical Crowned Gearing
- XTRUE (XT) - Spur Gearing
- DuraTRUE (DT) - Spur Gearing
- EverTRUE (ET) - Continuous Duty, Spur Gearing
- AquaTRUE (AQT) - Stainless Steel Construction, IP66, IP67 and IP69K Protection. Perfect for washdown applications, Spur Gearing.
Frame Size
Roughly the width of the gear head.
Ratio
Input speed vs. output speed
Output Shaft: Single, Dual or Hollow
- Single - One solid output shaft
- Dual - Two solid output shafts. Only available on right angle units
- Hollow - Gearbox has a through bore for clamping onto a shaft. Only available on right angle units.
Angle
- Inline - Motor and output shaft will be in-line with each other
- Right Angle - Motor will be at a 90 degree angle from the output
Backlash
Backlash, sometimes called lash or play, is lost motion caused by space between the gear teeth.
Gearing
Helical gears are known for their quiet and smooth operation along with their ability to transmit higher loads than spur gears.
Peak Torque
Allowable momentary peak torque for emergency stop or heavy shock loading.
Duty Cycle
Continuous Duty - Able to run non-stop
Redimount
The RediMount is the adapter that goes between the Motor and the Gearhead. Different RediMount numbers have different dimensions. If you need assistance in selecting a RediMount to fit your motor contact customer support or visit Micromotioneering for assistance.
All Micron gearheads use the innovative RediMount? system, the most flexible mounting system available today. This mounting system allows easy and error free mounting to any motor on the market in just three easy steps - simply align, mount and tighten.
Slim Line
More compact version.